IEC 320 C14 - C15 Hot Condition Power Cable 5m - P-C14C15B5/W

Our IEC 320 C14 (M) - IEC 320 C15 (F) Hot Condition Power Cable is constructed on 1.0mm2 H05RR-F cable and suitable for use with UPS and Cisco Equipment

Some IT equipment including many Cisco appliances use a power cord with a IEC320 C15 socket and a matching IEC320 C16 inlet connector on the appliance. These are similar to the IEC320 C13 and IEC320 C14 plugs and sockets but have a higher temperature rating at 120 degrees Celsius rather than 70 degrees Celsius.

The IEC320 C15 socket will fit the IEC320 C14 inlet but the IEC320 C13 will not fit the IEC320 C16 as the C16 has a plastic block opposite the earth pin preventing IEC320 C13 fitting. IEC320 C15 connectors have a cut out hole to match.

These leads are often refered to as Hot Condition cables and are generally used to connect Cisco equipment to UPS and power distribution equipment.